Use the Out of Vehicle Charge function to charge a battery not installed and connected in a vehicle.
At any time during the test, tap 
to return to the previous screen; or 
to return to the Main Menu.
Battery Test
- Connect the charger clamps to the appropriate battery posts.
- At the Main Menu, tap Out of Vehicle Charge. The Edit Battery Information screen is displayed.
3. Tap the box across from each displayed parameter and select the correct information from the displayed list.
4. Tap Next to begin the Battery Test or Reset to return to the default settings.
The charger performs a series of tests to determine the overall condition of the battery before applying a charge. Those steps include measuring the ambient battery temperature, Cranking Health, Reserve Capacity, Charge Acceptance, and applying a Load Test to the battery.
The test results are then displayed on the charger screen.
Battery Test Results
See the In Vehicle Charge article for screen images.
To print or send the test to a configured printer or via email, tap Send Results and select an option. To continued with the System Test, tap System Test. To return to the Home Screen, tap Done.
NOTE: Refer to the Test Results Decision Tables article for a complete definition of possible test results.