Use Manual Charge to charge a battery using user-selectable parameteres including voltage, current, or time.
At any time during the test, tap 
to return to the previous screen; or 
to return to the Main Menu.
- Connect the charger clamps to the appropriate battery posts.
- At the Main Menu, tap Manual Charge. The Edit Battery Information screen is displayed.
- Edit the battery information and charging parameters:
NOTE: See the Battery Information Definitions article for complete parameter descriptions.
If necessary, tap on the corresponding box to edit the parameter information. If the displayed information is correct, tap Continue to begin the Battery Test.
The charger performs a series of tests to determine the overall condition of the battery before applying a charge. Those steps include measuring the ambient battery temperature, Cranking Health, Reserve Capacity, Charge Acceptance, and applying a Load Test to the battery.
The test results are then displayed on the charger screen.
To print or send the test to a configured printer or via email, tap Send Results and select an option. To return to the Home Screen, tap Done or to return to the Main Menu.