Jump Start makes high output current available to boost charge and in-vehicle battery and assist in starting the engine.
Press STOP to abort at any time.
IMPORTANT: Before entering the Jump Start mode, verify that all vehicle loads are off and the key is not in the ignition.
At any time during the test, tap 
to return to the previous screen; or 
to return to the Main Menu.
- Connect the charger clamps to the appropriate battery posts.
- At the Main Menu, tap Jump Start. The Jump Start screen is displayed.
3. Tap the box across from each displayed parameter and select the correct information from the displayed list.
4. Tap Begin Jump Start to begin the Jump Start process.
The charger performs a series of tests to determine the overall condition of the battery before applying a boost charge to the battery.The charger WILL NOT boost charge a battery that has tested unsafe.
NOTE: The maximum charge time is 10 (ten) minutes.
IMPORTANT: DO NOT crank the engine during the Jump Start process.
5. Following a successful boost charge, the charger displays a Start Engine message. The engine can now by cranked for up to 5 (five) seconds.
6. When the charger displays the Jump Start Complete message, press Stop. A warning tone will sound every second until you press Stop.
7. The results of the Jump Start session are displayed on the charger screen at the end of the session.
To print or send the test to a configured printer or via email, tap Send Results and select an option. Tap Done or to return to the Main Menu.